In order to efficiently mine Ethereum (ETH), RavenCoin (RVN), Ergo (ERG) or any other cryptocurrency, you’ll need a motherboard with lots of PCIe slots. Fortunately, most of these motherboards are relatively easy to obtain. However, once your mining rig starts utilizing five or more GPUs, you might want to consider getting a specialized mining motherboard in order to keep your system running 24/7.
Read also: The Best Power Supply (PSU) for Mining Cryptocurrency in 2022
Most motherboard manufacturers these days fully support cryptocurrency miners, and are producing boards that are specifically designed to maximize your mining hashrate. Compared to ordinary motherboards, mining motherboards feature multiple PCIe slots that allow you to attach a large number of graphics cards, and also feature specially modified BIOS configurations that are optimized for these types of multi-GPU setups.
When choosing the best motherboard for your mining rig, you should take into consideration the number of GPUs you’ll use in your mining rig, and the overall system stability. Gaming motherboards are good for mining, however, they often very expensive and have a ton of features that you’ll probably never need. Dedicated mining motherboards, on the other hand, usually offer very few extra features, but are greatly optimized for mining cryptocurrencies.
In order to fit all those mining GPUs to your mining motherboard, you’ll need PCI riser cables, so be sure to buy them before you start building your mining rig. Last but not least, for running a mining rig you’ll also need a powerful power supply unit. Here is a list of the best mining motherboards that are currently available on the market:
Best Overall:
Biostar TB360-BTC PRO 2.0
Best High-End:
ASUS B250 Mining Expert
Best Riserless Motherboard:
ASRock H510 PRO BTC+
Best for AMD Ryzen CPUs:
ASUS ROG Strix B550-F Gaming
Best Value:
ASUS Prime Z590-V
Best with Integrated CPU:
MEG Pro BTC-S37
Best for Gaming & Mining:
MSI MPG X570 Gaming Edge WiFi
Best Overall: Biostar TB360-BTC PRO 2.0
Chipset | Intel B360 |
Socket | LGA 1151 |
Processor Support | 9th & 8th Gen Intel Core/Pentium/Celeron Processors |
Memory Support | 2 x DDR4, 2666 MHz, up to 32GB |
PCIe Connectors | 1 x PCIe 3.0 x16 (CPU) 11 × PCIe 3.0 x1 (Chipset) |
SATA / M.2 | 4 × SATA3 6.0 Gb/s 1 × M.2 to 2280 NVMe x4 |
Networking | 1 × 1.0 Gb/s Realtek LAN Chip |
Audio | Realtek 8-Channel ALC887 |
Rear Connectors | 1 × LAN (RJ45) 1 x VGA 1 x HDMI 2 × USB 2.0 4 x USB 3.1 Gen1 3 x Audio jacks |
- Supports up to 12 GPUs
- Dual 24-pin ATX connectors
- PCI-E slot detection system
- Affordable price
- Doesn’t support the latest Intel CPUs
- No KVM features
Although it doesn’t support the latest 12th Gen Intel Core CPUs, the Biostar TB360-BTC PRO 2.0 is probably one of the best mining motherboards currently available on the market. Featuring support for up to 12 graphics cards, as well as support for both 9th and 8th Gen Intel Core CPUs, this motherboard is perfect for building a powerful mining rig. The TB360-BTC PRO 2.0 can also boast with user-friendly BIOS optimized for management of multiple graphics cards, as well as with consistent QoL BIOS updates provided by Biostar themselves.
Besides featuring an impressive number of PCI-E slots, this motherboard can also run dual power supplies, thanks to its two 24-pin ATX power supply connectors, and is designed to operate in very humid and moist environments, which is another big plus. The board also has a PCI-E slot detection BIOS boot screen, and can boast with support for 4K @ 24 Hz video output via HDMI connector. Overall, the TB360-BTC Expert is a feature-rich and easy to use motherboard that is able to fulfill the needs of even the most demanding miners.
Best High-End: ASUS B250 Mining Expert
Chipset | Intel B250 |
Socket | LGA 1151 |
Processor Support | 7th & 6th Gen Intel Core i7/i5/i3/Pentium/Celeron |
Memory Support | 2 x DDR4, 2400 MHz, up to 32GB |
PCIe Connectors | 1 × PCIe 3.0 x16 (CPU) 18 x PCIe 2.0 x1 |
SATA / M.2 | 4 × SATA3 6.0 Gb/s |
Networking | 1 × 1.0 Gb/s Intel LAN Chip |
Audio | Realtek 7.1-Channel ALC887 |
Rear Connectors | 1 × LAN (RJ45) 1 x HDMI 2 × USB 2.0 4 x USB 3.1 Gen1 3 x Audio jacks |
- Supports up to 19 GPUs
- Very reliable and stable
- Optimized mining BIOS mode
- PCIe Slot State Detection system
- PCIe slots are very close to each other
- Very expensive
The ASUS B250 Mining Expert is without a doubt one of the most versatile and feature-rich mining motherboards out there. Featuring support for a whooping 19 GPUs, this motherboard has no real competitors in the market. The B250 Mining Expert also comes with a special mining mode that is built into its BIOS, and it enables you to easily configure all your mining GPUs in order to reduce your mining costs maximize your profit.
This motherboard can also boast with an exclusive triple-ATX12V design that ensures stable power delivery, and it features a PCIe Slot State Detection system that makes debugging your system as easy as possible. Its two memory slots can address up to 32 GB of DDR4 RAM, and you connect up to four SATA 3 drives, and up to six USB devices at the same time. Despite these extra fancy features, the B250 Mining Expert is quite straightforward and easy to use. The only downside is that it’s very expensive, but given the fact that it’s made by a reliable brand, and that it features so many PCI-E slots, this board is well worth its price.
Best Riserless Motherboard: ASRock H510 PRO BTC+
Chipset | Intel H510 |
Socket | LGA 1200 |
Processor Support | 11th & 10th Gen Intel Core/Pentium/Celeron Processors |
Memory Support | 1 x DDR4, 3200 MHz, up to 32GB |
PCIe Connectors | 6 × PCIe 3.0 x16 (x16/x1) 1 x Mining Port |
SATA / M.2 | 1 × SATA3 6.0 Gb/s 1 × M.2 to 22110 NVMe x4 |
Networking | 1 × 1.0 Gb/s Intel LAN Chip |
Audio | None |
Rear Connectors | 1 × LAN (RJ45) 1 x HDMI 2 × USB 2.0 2 x USB 3.2 Gen1 |
- Risereless design
- Supports up to 7 GPUs
- Supports the latest 11th Gen Intel CPUs
- Dual 24-pin ATX connectors
- Affordable price
- Large PCB dimensions
- Only one RAM slot
- Lacks onboard audio card
Due to an extremely high demand, finding high-quality mining motherboards in stock these days is quite difficult. Fortunately, ASRock is here to save the day with its new lineup of motherboards specifically designed for mining. The H510 PRO BTC+ may not be the best mining motherboard out there, but there are several reasons why we like it very much. First of all, it features a fully riserless design, meaning it can accommodate up to six double-slot GPUs without use of any PCIe risers. Second, it supports the latest 10th and 11th Gen Intel Core CPUs, which only a handful of mining motherboards do.
The H510 PRO BTC+ also features one USB Type PCIe x1 mining port, meaning it supports up to 7 GPUs in total. The board also comes with one M.2 slot, and features an extra 24-pin ATX power connector for connecting second PSU. This board can also boast with high density glass fabric PCB which protects the motherboard from electrical shorts caused by humidity, as well as with next generation PWM design which provides CPU Vcore voltage more efficiently and smoothly. Of course, this motherboard also has some drawbacks. Firstly, it is pretty big, meaning it is hard to find a suitable case for it. Second, it is quite barebone in essence, since it features only one RAM slot, and lacks an onboard audio card. Despite its flaws, this is a very stable and reliable motherboard that will serve you well.
Best for AMD Ryzen CPUs: ASUS ROG Strix B550-F Gaming
Chipset | AMD B550 |
Socket | AM4 |
Processor Support | AMD Ryzen 5000/4000-G/3000 Series Processors |
Memory Support | 4 x DDR4, 5100 MHz (O.C.), up to 128GB |
PCIe Connectors | 1 × PCIe 4.0/3.0 x16 (CPU) 1 x PCIe 3.0 x16 (x4, chipset) 3 x PCIe 3.0 x1 (chipset) |
SATA / M.2 | 6 × SATA3 6.0 Gb/s 2 × M.2 to 22110 NVMe x4 |
Networking | 1 × 2.5 Gb/s Intel LAN Chip |
Audio | ROG SupremeFX 8-channel S1220A HD Audio |
Rear Connectors | 1 × LAN (RJ45) 1 x HDMI 1 x DisplayPort 2 x USB 2.0 4 x USB 3.2 Gen1 1 x USB 3.2 Gen2 Type-A 1 x USB 3.2 Gen2 Type-C 1 x S/PDIF out 5 x Audio jacks |
- Affordable price
- Supports PCIe 4.0 interface
- Supports up to 5 GPUs
- Powerful VRM solution
- Intel 2.5G LAN
- Has no onboard Wi-Fi module
- Quirky RGB lighting software
If you are looking for an affordable, yet feature-rich AM4 motherboard for your crypto mining rig, then consider checking out the ASUS ROG Strix B550-F Gaming. This motherboard comes with two full-sized PCIe x16 slots (the upper one supports PCIe 4.0 interface), as well as with three PCIe x1 slots, meaning it allows you to install up to five GPUs with the help of PCI-E riser cables. Another cool feature of this motherboard is that it comes with a 12+2 power phases VRM solution, which means it’s perfectly suited for some serious CPU overclocking.
The ROG Strix B550-F Gaming also features two M.2 NVMe slots with RAID support, as well as six SATA 6Gb/s ports. You also get four USB 3.2 Gen 1 ports, two USB 2.0 ports, and one USB 3.2 Type-C connector. Although the board lacks integrated Wi-Fi module, it can boast with Intel 2.5G LAN for ultra-fast Internet connection. Overall, this is a very well-made and fairly affordable AM4 motherboard, that can be used both for building a gaming PC, or a crypto mining rig featuring AMD Ryzen CPU.
Best Value: ASUS Prime Z590-V
Chipset | Intel Z590 |
Socket | LGA 1200 |
Processor Support | 11th & 10th Gen Intel Core/Pentium/Celeron Processors |
Memory Support | 4 x DDR4, 5133 MHz (O.C.), up to 128GB |
PCIe Connectors | 1 × PCIe 4.0 x16 (CPU) 1 x PCIe 3.0 x16 (x4) 3 x PCIe 3.0 x1 |
SATA / M.2 | 4 × SATA3 6.0 Gb/s 2 × M.2 to 22110 NVMe x4 1 x M.2 to 2280 NVMe x4 |
Networking | 1 × 1.0 Gb/s Intel LAN Chip |
Audio | Realtek 7.1-Channel ALC897 |
Rear Connectors | 1 × LAN (RJ45) 1 x DisplayPort 1 × HDMI 2 x USB 2.0 2 x USB 3.2 Gen 1 Type-A 1 x USB 3.2 Gen 2 Type-A 1 x USB 3.2 Gen 2 Type-C 1 x V-M.2 slot (Key-E) 1 x Optical S/PDIF out 5 x Audio jacks |
- Affordable price
- Supports up to 5 GPUs
- 9 power phase VRM design
- Three M.2 slots
- User-friendly UEFI
- Doesn’t feature 2.5G LAN
If you are looking for an affordable and reliable motherboard that can support up to five GPUs, then you’ll like the ASUS Prime Z590-V. This motherboard features support for the latest 11th and 10th Gen Intel CPUs, as well as PCIe 4.0 interface. The board also comes with 9 power phase VRM design, meaning it’s also suitable for performing mild CPU overclocking. Alongside five PCIe slots, the board also features three M.2 slots, a USB Type-C connector, and an internal Thunderbolt 4 header.
Like all the other motherboards from ASUS’ Prime series, the Z590-V can boast with excellent build quality, premium PCB components, multiple hardware safeguards for all-round protection, and large VRM heatsinks. The Z590-V also comes with comprehensive built-in controls for fans and AIO pump which can be accessed via ASUS’s Fan Xpert 4 utility or the acclaimed UEFI. This board also features a wide range of rear connectors, which is a big plus. Overall, this is a very reliable and surprisingly affordable motherboard that’s suitable both mining and day-to-day PC use.
Best with Integrated CPU: MEG Pro BTC-S37
Processor | Intel Celeron 1037U |
Chipset | Intel HM77 |
Socket | FCBGA1023 |
Memory Support | 1 x DDR3, 1600 MHz, up to 32GB |
PCIe Connectors | 8 x PCIe 2.0 x16 (x1) |
SATA / M.2 | 1 × SATA3 6.0 Gb/s 1 x SATA 3Gb/s 1 x mSATA 2.0 |
Networking | 1 × 1.0 Gb/s Realtek LAN Chip |
Audio | None |
Rear Connectors | 1 × LAN (RJ45) 1 × HDMI 1 x VGA 4 x USB 2.0 |
- Extremely cheap
- Integrated CPU
- Supports 8 GPUs
- Robust and simple
- No onboard audio
- Features only PCIe 2.0 x16 slots
The MEG Pro BTC-S37 is an ultra-cheap mining motherboard made by Chinese brand MEG Pro. Despite the fact that it’s even cheaper than some entry-level mATX motherboards, the MEG Pro BTC-S37 comes with an integrated onboard Intel Celeron 1037U processor, and supports up to eight GPUs, which is quite an astonishing feat compared to what its competitors are able to offer for the same price. This motherboard also comes with an onboard Realtek Gigabit LAN chip, four USB 2.0 ports, three SATA ports, and one HDMI and one VGA port.
Another great thing about this motherboard is that it features a very wide layout, which enables you to install all of your mining GPUs directly to the PCB without use of any riser cables. It is also worth mentioning that this motherboard supports installation of DDR3 memory modules, which is another cost-saving feature as most of these modules are cheap and easy to find these days. However, having a low price tag also comes with some compromises. First of all, this motherboard has no onboard audio, which may be an issue for some users, and it features only PCI-E x16 2.0 slots, which is somewhat disappointing. However, when it comes to mining it does its job pretty well, and it pays itself off very quickly.
Best for Gaming & Mining: MSI MPG X570 Gaming Edge WiFi
Chipset | AMD X570 |
Socket | AM4 |
Processor Support | AMD Ryzen 5000/3000/2000 Series Processors |
Memory Support | 4 x DDR4, 4400 MHz (O.C.), up to 128GB |
PCIe Connectors | 1 x PCIe 4.0/3.0 x16 slot (CPU) 1 x PCIe 4.0/3.0 x16 slot (x4, chipset) 3 x PCIe 3.0 x1 slots (chipset) |
SATA / M.2 | 6 x SATA3 6.0 Gb/s 1 x M.2 to 22110 NVMe x4 (PCIe 4.0) 1 x M.2 to 2280 NVMe x4 (PCIe 3.0) |
Networking | 1 × 1.0 Gb/s Realtek LAN Chip 1 x Intel Wi-Fi 6 802.11a/b/g/n/ac + Bluetooth 4.2 |
Audio | Realtek 7.1-Channel ALC1220 |
Rear Connectors | 1 × LAN (RJ45) 1 × HDMI 2 x USB 2.0 2 x USB 3.2 Gen1 Type-A 2 x USB 3.2 Gen2 Type-A 1 x USB 3.2 Gen2 Type-C + Type-A 1 x Optical S/PDIF out 5 x audio jacks |
- Supports up to 5 GPUs
- Good VRM solution
- Integrated Intel Wi-Fi 5 module
- Plenty of USB ports and SATA connectors
- Reasonably priced
- Doesn’t have DisplayPort connector
- Features Gigabit Ethernet
Although it wasn’t designed to be used for mining, the MSI MPG X570 Gaming Edge WiFi can be efficiently used for hashing out those crypto coins, as well as for some high-end gaming, and even serious content creation. The MSI MPG X570 Gaming Edge features a powerful 8 power stages VRM design, and it comes with two full-sized PCIe x16 slots, as well as with three PCIe x1 slots, meaning it can support up to five GPUs. The board also features two M.2 slots for NVMe SSDs, and comes with additional 6 SATA3 ports, which is another big plus.
The MPG X570 Gaming Edge can also boast with Realtek 1 GbE LAN, as well as with onboard Intel Wi-Fi 5 module for improved connectivity. On its rear panel you’ll find four USB 3.2 Type-A ports, as well as one USB 3.2 Type-C port, five audio jacks, one HDMI, and one S/PDIF out connector. The MPG X570 Gaming Edge WiFi has a powerful BIOS that is very easy to use, so configuring multi-GPU configurations is quite simple with this board. The board also supports CPU overclocking thanks to its efficient power delivery solution and high-quality capacitors, and has RGB lighting which you can customize according to your own preferences.
Conclusion
Picking the right motherboard for your mining rig largely depends on the number of GPUs you’ll be using to mine cryptocurrencies. If you are a beginner, you should start with a motherboard that features at least six slots. The motherboards we’ve listed here are known for their stability and reliability, so whichever you choose should deliver good results. We hope our buying guide helped you in search of the information you were looking for. If you still feel confused, and need advice about buying, feel free to post comment below. We will try to help you.